How is tubular bus installed? In the construction of power transmission and transformation power, The installation of tubular bus should have the principle of safety, beauty and economy, and in the specific operation process, the installation should be carried out according to the drawing design, and the operation should be carried out in strict accordance with the requirements of the installation process 。

1. Verify according to the drawing data provided by the construction unit or design institute.

2. Fix the bracket according to the drawing and site requirements.

3. Install the ground column according to the drawing,

4. Install hardware fittings on the bracket, and in case of semi insulation, install fixed fittings on the support insulator.

5. The tubular busbar shall be hoisted to the fixed installation position and installed.

6. Terminal connection, including installation of terminal connector and expansion joint.

7. Appearance treatment: including dirt on tubular bus and accessories.

After all steps and operations are completed, each item shall be inspected one by one according to the contents listed on the installation record card.

The above is the installation method of tubular bus, if you are interested in tubular bus products, welcome to consult 13178866601 (wechat with) Deng Gong, bus engineer with 25 years of field experience, can answer any questions about products, quotation and engineering for you!

How is tubular bus installed? In addition, in order to prevent the aeolian vibration of tubular bus, the use of tubular bus bracket, the use of tubular bus with large span moment, the appropriate fixing hardware of tubular bus, the change of fixed position of tubular bus and the installation of damping line inside the tubular bus are adopted In the construction of tubular bus, the common method is tubular bus If a damping line is installed inside, should this resistance line be installed? Let me tell you about it!

The first kind: by winding a certain quality spiral on the surface of the tube bus.

The second kind: use a loose steel core aluminum strand or aluminum strand directly through the inside of the tube bus.

However, our Guangdong High Power Technology Co., Ltd. adopts a new type of tubular bus, which adopts epoxy resin casting tubular bus. The material is different from the ordinary polyfluoroethylene insulation layer, and the performance is more superior. Therefore, it is not necessary to add damping line to prevent the vibration of tubular bus. Click here to view more installation cases of tubular bus!